Ø Install the W61PC software on the computer that you will use to control the W61LAN
Ø Connect the W61LAN to the LAN
Ø Check if the W61LAN computer is visible on your LAN (remember the firewall may block ping and ICMP)
Ø Start the W61PC application
Ø Select a W61PC card for remote control by using the Configuration | W61PC Card… menu
Ø Disconnect, select Remote Computer and enter the name of the W61LAN remote computer (“W61LANnnn”) or its IP address. Enter the port number (default is port 33233) and select the speed (10M for LAN)
Ø Click Connect
Ø Select the card and close the “W61PC Card” window by pressing Done
Ø Start a mode
The selected entry is stored in the card’s initialization file (*.ini file) and is available when the W61PC application is restarted at a later time. The settings may be changed at any time.
Note: The version of the W61PC software on the controlling client computer must be the same as that on the W61LAN.